Digiprog 3 V4.94 Change KM on Toyota Hilux 93c66

Obdii365.com engineers today tested Digiprog 3 v4.94 odometer correction tool on Toyota hilux 93c66. Here displays the test procedure.

Tool used: Digiprog3 v4.94 odometer programmer

Model: Toyota HILUX C66

Procedure of odometer correction with Digiprog 3 master:

Adapter connection:

Pin out connection:

TOYOTA

SELECCIONE MODELO

HILUX C66

EEPROM: 93SC66

VIEJO: 132005KM

COMPRUEBE VALOR ESCRITO – 61132KM

Mileage is changed successfully, from 132005KM to 61132KM.

NOTE: Tips for Using Digiprog III:

1. Always connect the Eeprom to the ST01 or ST04 before you connect to the DigiProg this will avoid Electro static feedback (ESD).
2. Never solder the connections whilst the lead is connected to the programmer, this will damage the DigiProg.
3. Always keep your DigiProg 3 in its case when not in Use & keep it in a dry environment at night (don’t leave it in the trunk of your car) If you are using solvents to remove lacquers’ from Eeprom’s ensure that they are cleaned
4. completely as the solvent can damage the clips.

http://blog.obdii365.com/2016/01/24/digiprog-3-v4-94-change-km-on-toyota-hilux-93c66/