How to use Digiprog 3 to change mileage on Audi A8 2003-

Digiprog 3 v4.94 odometer correction tool how to use for Audi A8 (2003-). Here are notes for you all, of Tacho meter value

Audi A8 (2003-)

Diagnostic connection is located in the cabin

Connect Diagnosis Port with DP3 cable of Plug 16

Ignition on

Connect the DigiProg 3 main unit to Plug 16

The DigiProg needs no separate electricity supply; it is supplied via the diagnosis port

Follow DigiProg3 v4.94 instruction and change KM

Enter KM value and confirm Entry

Audi A8 mileage correction completed!

Before:

After:

Job’s done!

Note: If error message “Access denied” pops up, pls. choose:

PKW/LKW-Audi-A8-2003-(4E) 1. Flash Cxxx/

Dxxx

Confirm with Hook

Remove fuse 5 + 10

Wait approx. 5 seconds

Reinstall fuse

if tacho meter is dark

Switch Ignition on and off

Choose program:

PKW/LKW– Audi—A8-2003-(4E) Diag

Enter KM value and confirm Entry.

http://blog.obdii365.com/2017/12/17/audi-a8-2003-odometer-correction-with-digiprog-3/

How to change Volvo V60 odometer by Digiprog 3

It is possible to change change KM in Volvo V60 cluster. Depend of what tool you have. Here are instructions and pinouts provided.

VOLVO V60 HC12

Connector 51 is required

VOLVO V60 HC12

Remove the instrument cluster and remove the back cover.
Solder from connector 51 the colors at the marked same color
Soldering points. Disconnect the conductor (pink arrow)
(PICTURES ON THE FOLLOWING)

Connect the plug to the Digiprog 3 odometer correction tool.
Select the program:

Car / Truck – VOLVO V60 HC12.
The Digiprog 3 v4.94 shows the old / wrong CM reading.
The new / correct KM stand program and ready.
After confirmation, the process is completed.
Solder all connections.
FINISHED.

VOLVO V60 V70 S80 MOD. 2002 H12 V2

Connector 51 is required
VOLVO V60 V70 S80 MODEL 2002 H12 V2
Remove the instrument cluster and remove the back cover.
Solder from connector 51 the colors at the marked same color
Soldering points.

Connect the plug to the Digiprog3 V4.94.
Select the program: Car / Truck – VOLVO V70 HC12 V2.
The Digiprog shows the old / wrong CM reading.
The new / correct KM stand program and ready.
After confirmation, the process is completed.
Solder all connections.
FINISHED.

http://www.obdii365.com/wholesale/odometer-correction-tools/

blog.obdii365.com

Yanhua Digimaster 3 and CKM100 adds Key Unlock and Reset

Original Yanhua Digimaster 3 odometer correction tool and CKM100 car key master key programmer released new upgrade on 27th, July 2017.

Digimaster III V1.8.1707.21 Update Feature (2017-7-27):

new add car models for odometer adjustment and airbag resetting models.
New added odometer adjustment:
1. American GM Buick Regal 24C32
2. American GM Buick LaCrosse 24C32
3. American GM Buick Verano 24C32

New added airbag resetting:
1. Luxgen 28556KM120

Digimaster/CKM100 New upgrade developed key unlock and reset functions. Free to all. (But require to work with DR key adapter)

Digimaster3/CKM100 Unlocking / Reset key data car models list

Car model PCB mainboard no./frequency/key No.
Audi PCB mainboard no：233.453.111-02
315MHz-8T0959754A
315MHz-8T0959754C
315MHz-8T0959754J

PCB mainboard no：233.453.111-05(06)
315MHz-4G0959754G
315MHz-4G0959754J
315MHz-4H0959754G
315MHz-4H0959754J
315MHz-8T0959754A
315MHz-8T0959754C
315MHz-8T0959754G
315MHz-8T0959754J
433MHz-8T0959754
868MHz-4G0959754K
868MHz-4H0959754K
868MHz-8T0959754D

PCB mainboard no：233.453.211-01(02)
315MHz-4G0959754J
315MHz-8H0959754DB
315MHz-8K0959754
315MHz-8K0959754C
315MHz-8K0959754G

PCB mainboard no：233.628.011-03
433MHz-7P6959754AF
868MHz-7P6959754L

PCB mainboard no：233.628.011-04
315MHz-7P6959754AR
433MHz-7P6959754AO

PCB mainboard no：233.628.021-02
868MHz-7P6959754AT

BMW    E series chassis    Aftermarket key
genuine key 315
genuine key 868

F series chassis
315MHz-5WK49663
315MHz-HUF5662
433MHz-5WK49662
433MHz-HUF5663
433MHz-HUF5767
868MHz-5WK49661
868MHz-HUF5661

Porsche
315MHz-7PP959753BM
433MHz-7PP959753AJ
433MHz-7PP959753BN
433MHz-7PP959753BQ
433MHz-7PP959753BS

Land Rover
315MHz-YWX000071
433MHz-5E0U40247
433MHz-YWX000061

Volvo
900MHz-5WK49266

Buick
315MHz-4 button-13500225/13584825
315MHz-5 button-13500224/13584825

Chevrolet
315MHz-4 button-13500222
315MHz-4 button-13500318/13584828
315MHz-5 button-13500221
315MHz-5 button-13500319/13584829
433MHz-2 button-13500218

Cadillac
315MHz-5 button-NBG009768T

GM
433MHz-3 button
433MHz-4 button
433MHz-5 button

Opel
433MHz-2 button-13149645
433MHz-2 button-13149658
433MHz-2 button-13188281
433MHz-2 button-13188284
433MHz-2 button-13500235
433MHz-3 button-13500234

Peugeot  Citroen    21676652
E25CI009
E28CI01B
E33CI002

Hyundai  KIA
CMFCH02
CMFEU03
HMFEU04
HMFKR04
HMFNA04

Mitsubishi
433MHz-G8D-644M

Renault
433MHz-285971998R
433MHz-285974100R
433MHz-285975779R
433MHz-805673071R

Dodge    Jeep   Chrysler    567.737.061
567.783.031
KOBOTO4A
M3N5WY72XX
M3N5WY783X
OHT692427AA
OHT692713AA

How to update Digimaster3 mileage programmer?

Digimaster III odometer correction tool user manual

http://www.obdii365.com/info/yanhua-digimaster-3-update-to-v18170721-47497.html

Honda Civic 2001 NEC Processor Odometer Correction

Question:

I need to change KM on a Honda Civic 2001 with NEC Processor. I'm looking for pinout to this model. I'm attaching pictures. I'm using Digiprog 3 v4.94 odometer correction tool to read not even sure if this programmer does this dash.

Solution:

Someone suggest using ST47 cable. It will not work.

ST47 is for eeproms, this dash is an NEC processor and Digiprog3 cannot do them.

Need a programmer capable of doing NEC, i.e the powerful mileage programmer-YanHua digimaster 3 III.

www.obdii365.com

Digiprog 3 V4.94 Test OK VAG VW Audi Skoda Seat Cars via OBD

Here is the test report of VAG group vehicles (VW, Audi, Skoda, Seat) with Digiprog 3 v4.94 odometer correction tool via OBD, most successful but some failed.



Tried and work ok via OBD:

Volkswagen Eos obd2 ------ok

VW eos 2007 ---> Diag obd2 work
VW polo, seat ibiza 2007 magenti marelli motorola ST48 by points OK
VW polo 2001-2005 vdo obd ok

VW polo trw plug ok

VW fox 2007 hc912 by solder point and ST48 work

VW touareg 2004 obd ok

VW Tourag 2013... read ok but write failed

VW Tiguan 2007 ---> OBD OK

VW tiguan 2010-2011 OBD ok

VW AMAROK 2012 obd ok 1 min

VW bora all obd ok

VW jetta all obd ok

VW jetta 2012 work obd

VW t5 obd ok

VW t5 ecu edc 16 ok 50%50

VW touram dash obd ok

Golf 4 BOO via OBD ok and Audi a4 boo crypto too
all Golf 4 without problem!!!

Golf 5plus by obd -visteon dash read ok write ok

Golf 6 plus 2010 work ok
Golf MK6 2012 works OK

all golf 6 work good till 2013 year

Passat 2013 obd..ok

Passat 2007 obd ok
Passat 2008 via obd-dash read ok write ok/ecu read ok write ok 5 min.

Passat CC 2.0tdi 2010y done by obd

Passat 2006 tdi dash & ecu obd OK

Passat 2001-2011 obd ok

Passat 2011 work obd 5 min
Passat 2012 work obd
Passat cc 2012 work obd
Passat b5 2003 tdi all ok



Audi a1 works. (depending on software number)

Audi a2-obd -ok

Audi a3-repair 999999 in dash with digiprog

Audi A3 2010 by OBD OK

Audi A3 2002 obd2 is ok

Audi a3-2001-vdo-obd ok

Audi a4 2001-2005-obd ok

Audi a4 8e b6 2004 obd ok, use 2 minutes

Audi a4 2007 obd dash read ok write ok/ecu make-it via touran edc16 write 2 times to change.

Audi a4 2009 3.0quattro obd ok

Audi a4 2005-2009-obd ok

Audi A4 2010 Work

Audi a4 2012 obd ok and fast
Audi a5 2013 obd ok
Audi a5-2010-obd ok 15 min

Audi a6 c5 obd

Audi A6 2002 ok after some effort.
Audi a5 2009 3.2L obd ok 30min

Audi A6, 2009 work OBD, 4-5 minute.

Audi A6 2010 dash via obd (takes a while to find code but ok)

Audi A8 4.2 tdi 2008 Dash OBD OK 2min

Audi S3 2002 obd2 is ok
Audi TT 2002 obd2 n8 is ok

Audi q3-2010-obd ok 15 min

Audi Q5 2.0tdi 2010 by obd ...20-30min
Audi Q7 2012 20 sec by obd work ok

Audi Q7 2007 --->OBD work

Audi q7-2008-obd ok

Audi tt hc 12 plug ok



Skoda Superb (3t) II 2009y only by obd less then 5min

Skoda octavia 2009 1.9tdi instrument ok, ecu ok, dsg reset ok

Skoda Octavia 2010Y 1.6TDI cluster via obd
Skoda Octavia 1z 2011 OBD ok

Skoda Fabia MK2 2009 diag no problem

SKODA Fabia 2009 obd ok.

Skoda Roomster 2009 ---> Diag work Perfect



Seat MII 2013 ---> OBD Work





Failed with digiprog3:

VW polo 2012 johnson control nec 95320 kill checksum dashboard error ... (x-tool or another good tool can fix it)



VW Golf 6 2013 OBD NOT OK



Ps. Maybe they can tried with other odometer programmers such as OBSTAR X300M coz it’s updatable for more cars.